Multi Stand Mills

Multi Stand Mills

In the area of cold rolling, products and materials can be produced on single-stand or multi-stand systems. The main difference is in the production area and the production time.
REDEX Group offers almost all processes as single-stand or multi-stand systems.

The larger dimensions of a multi-stand plant are compensated by the high production rates of these machines.
Whereas with a single-set-up system, the pre-material often has to pass through the machine several times (sometimes even reversing), a multi-set-up system usually allows the final dimensions to be produced in one pass.

Depending on the material used and the strength in question, both flat wires and round wires can be produced in the well-known RMW (Rectangular Magnet Wire) or RM (Reduction Mill) machines at speeds of up to 1200m/min.

  • These machines can be combined in countless variations. The right accessories are available for all needs:
  • Spooler
  • Decoiler
  • Measuring equipment
  • Cleaning units
  • Brushing machines
  • Ovens/annealing
  • Dancer systems
  • Safety technology
 

Although plants with 3-6 stands are the most common today, REDEX Group has also built plants with up to 21 stands in its long history.

Our goal is to help people in the best way possible. this is a basic principle in every case and cause for success. Our goal is to help people in the best way possible. this is a basic principle in every case and cause for success. 

OUR BUSINESS UNITS

OUR Company

Contact us

Our goal is to help people in the best way possible. this is a basic principle in every case and cause for success. Our goal is to help people in the best way possible. this is a basic principle in every case and cause for success. 

Business Units

OUR Company

Contact Redex Group